Warning! To avoid personal injury or death!
- ALWAYS unplug the appliance or disconnect the power before attempting any repairs.
- ALWAYS turn off the gas at the source before repairing any gas appliance.
- ALWAYS wear safety glasses when using tools.
- ALWAYS keep loose clothing and hair away from any moving parts.
Safety is of major importance when performing any service or repair on any electrical appliance. By using our website (www.Techmaster-inc.com), you agree with the terms and conditions of our disclaimer below.
(Please read the disclaimer at the bottom of this entry!!!)
Commons Issues with Washers:
- My Washer Doesn’t Work At All
- My Washer Fills and Drains at the Same Time
- My Washer Doesn’t Drain
- My Washer Does Not Produce Hot Water
- My Washer Does Not Produce Cold Water
- My Washer Has No Water Al All
My Washer Doesn’t Work At All
- No Power to the Washer
- Check to make sure power is getting to the washer.
- Check for a tripped circuit breaker or blown fuse.
- Check to see if the power cord is disconnected at the washer, if so, you may need to contact a professional to repair or replace it.
- Check for a tripped “GFI”
- Lid Switch
The washing machine won’t function without a working lid switch. Contact a professional to replace the lid switch, if needed.
My Washer Fills and Drains at the Same Time
- Drain Hose
- Your washing machine’s drain hose might be too low.
- Your washing machine’s drain hose may be pushed too far in to the drain stand.
My Washer Doesn’t Drain
- Lid Switch Assembly
The lid/door switch failure can make your washer stop pumping the water out and spin. Some lid switches can be checked with a multimeter, but door lock switches may not be able to be checked that way. Contact a professional to diagnose this issue.
- Drain Pump or Hose
- A clogged drain line.
- A clogged drain pump.
- A faulty drain pump.
- A faulty water pump belt.
- Some washers have a coin/debris trap. Check it out and clear it.
No Hot water
- The hot water is turned on.
- The washer’s fill hose screen is clogged.
- The water inlet solenoid valve may be defective.
- No power is going to the inlet solenoid valve.
Professional help is recommended for any repairs.
No Cold Water
- The cold water is turned on.
- The washer’s fill hose screen is clogged.
- The water inlet solenoid valve may be defective.
- No power is going to the inlet solenoid valve.
Professional help is recommended for any repairs.
There is no water at all
- The hot and cold water is turned on.
- The washer’s fill hose screen is clogged.
- The water inlet solenoid valve may be defective.
- No power is going to the inlet solenoid valve.
Professional help is recommended for any repairs.
Leave a reply